Search results for 'primer sealer'

Luxapool Epoxy Primer Sealer is an integral part of the Luxapool Epoxy Pool System where assurance of optimum adhesion is sought for many pool surfaces.

Is a long proven solvent based, high solids, two part epoxy, designed specially to eliminate surface pin holes and the ingress of water soluble salts which could lead to the blistering, flaking and peeling of the finish coat.

Is recommended as the first coat of the Luxapool Epoxy Pool System for many pool surfaces including new concrete, marblesheen, and old rendered surfaces.

USE AREAS:
As the first coat in the Luxapool Epoxy Pool System for selective use in:
- Swimming pools
- Water tanks
- Fish ponds
- Aquaculture ponds.

BENEFITS:
- High solids primer with good surface wetting.
- Excellent adhesion to sound, but porous concrete, render and marblesheen surfaces.
- Easy mix ratio via pre-pack quantities.

Coverage: approx. 15-20m² per 4L kit, per coat

REMINDER: If pool has been previously painted in Chlorinated Rubber, an Epoxy CANNOT be applied over the top.

Learn More

LUXAPOOL Poolside & Paving is a water-based, rubberised, non-slip coating system that is easy to apply and provides a safe and durable decorative surface for most small pebble, concrete and paved areas. It may be easily varied during application to a range of ‘non slip’ effects.

Areas where LUXAPOOL Poolside & Paving can be used include:
• Pool surrounds
• Decks and patios
• Balconies
• Boat decks, pontoons
• Wharf and landing dock surfaces
• Steps, stairs and walkways

LUXAPOOL Poolside & Paving is available in a range of 15 stylish colours and will adhere to most mineral surfaces including, pebblecrete, aged concrete, cement render, masonry, fibre-cement sheet and unglazed tiling.

Coverage: Allow 1L per m² total coverage

Preparation: Eco FriendlyUse of Acrylmeric Superseal Primer is recommended as the first coat of a systems approach to ensure maximum adhesion to such surfaces. A clear glaze is also available for improved stain resistance and easier maintenance.

_{COLORBOND® Steel colour names are registered trade marks of BlueScope Steel Ltd.}

REMINDER – You must apply one (1) coat of ACRYLMERIC Superseal Primer to all surfaces (if not previously painted with Poolside & Paving) before applying the Poolside & Paving.

Learn More

Acrylmeric Superseal Primer is a transparent, solvent based acrylic resin solution designed to penetrate and seal substrates - it provides a uniform surface for over-coating with Acrylmeric Membranes.

Acrylmeric Superseal Primer ensures excellent adhesion to most substrates, eliminates uneven absorbtion of subsequent coatings and minimises the possibility of loss of adhesion and efflorescence resulting from the leaching of residual alkali from the substrate. Usually requiring only one coat, Acrylmeric Superseal Primer is suitable for internal and external application on surfaces such as masonry, concrete, cement render, brickwork, block walls, columns and beams, etc. Acrylmeric Superseal Primer is the partner product for priming/sealing substrates prior to applying any of the Acrylmeric Membranes.

Ideal for use as a primer for all Luxapool Poolside and Paving applications

Coverage: 6 - 8m²/Litre   =    1 x 4L tin per 24 - 32m²

Learn More

The DIY PLUS+ kit is ideal for use where a sealer and then two top coats will be applied. This kit contains: 1 x 270mm roller frame 3 x 270mm roller covers 3 x 75mm paint brushes 1 x plastic roller tray 1 x paint stirrer Learn More

Acrylmeric Superseal Primer is a transparent, solvent based acrylic resin solution designed to penetrate and seal substrates - it provides a uniform surface for over-coating with Acrylmeric Membranes.

Acrylmeric Superseal Primer ensures excellent adhesion to most substrates, eliminates uneven absorbtion of subsequent coatings and minimises the possibility of loss of adhesion and efflorescence resulting from the leaching of residual alkali from the substrate. Usually requiring only one coat, Acrylmeric Superseal Primer is suitable for internal and external application on surfaces such as masonry, concrete, cement render, brickwork, block walls, columns and beams, etc. Acrylmeric Superseal Primer is the partner product for priming/sealing substrates prior to applying any of the Acrylmeric Membranes.

Ideal for use as a primer for all Luxapool Poolside and Paving applications

Coverage: 6 - 8m²/Litre   =    1 x 1L tin per 6 - 8m²

Learn More