Luxapool Primer Clear Sealer 4L Kit

Luxapool Epoxy Primer Sealer is an integral part of the Luxapool Epoxy Pool System where assurance of optimum adhesion is sought for many pool surfaces.

Is a long proven solvent based, high solids, two part epoxy, designed specially to eliminate surface pin holes and the ingress of water soluble salts which could lead to the blistering, flaking and peeling of the finish coat.

Is recommended as the first coat of the Luxapool Epoxy Pool System for many pool surfaces including new concrete, marblesheen, and old rendered surfaces.

USE AREAS:
As the first coat in the Luxapool Epoxy Pool System for selective use in:
- Swimming pools
- Water tanks
- Fish ponds
- Aquaculture ponds.

BENEFITS:
- High solids primer with good surface wetting.
- Excellent adhesion to sound, but porous concrete, render and marblesheen surfaces.
- Easy mix ratio via pre-pack quantities.

Coverage: approx. 15-20m² per 4L kit, per coat

REMINDER: If pool has been previously painted in Chlorinated Rubber, an Epoxy CANNOT be applied over the top.